Sunday, September 26, 2010

Trying some things out, and this year's Barkin' Ball...

Tiny swimming bronze turtles in resin 'water'




Originally I wanted to make bronze turtles swimming through glass that was cast around them.
But I asked a glass blower and learned that it would crack and break up as it cooled around the hard metal, so I explored other options, deciding to give a urethane resin a try.
I was advised to wear rubber gloves and eye protection, and avoid getting the uncured resin on my skin, as some people have an allergy to it and can develop a poison oak type of reaction.
And if you aren't allergic to it, you can become sensitive to it, so best avoid the situation and cover up.

Once it's cured it's completely harmless, clear, and hard as nails.
Just like what I wanted glass for, so I gave it a go.


turtles on the window sill while the 'water' cures




paraphernalia


You have to be really precise in mixing the A and B volumes. That's what the syringes are for.
The straws are for stirring them together.
And once mixed you have a limited working time before it starts to 'go off'.
And you have to keep it quite warm (ideally 140ºF) while it sets, or it will never cure completely.
So the window sill and a lamp took care of that.
The bronze was too hot to touch all afternoon.

Well I really like the effect, especially with a greeny colored patina under it, to contrast with the turtles.
It's got me interested in coming up with other things to do with it!

Mike finished the metalwork on my tree frogs on a vine and did a very nice job on the patina (of course!).
I'm undecided as yet about which base I prefer. I'm having the round metal one all tarted up so I can compare them side by side. I like its minimal profile, but I also like the reflectiveness of the granite.
We'll see...
Mike Masse doing his thing on my tree frogs on a vine

unfinished metal base

Barkin' Ball came along unexpectedly quickly this year. I almost didn't get my mice in on time!
Yee-haw! It's Barkin' Ball 2010.

These critters found a great home...
But I'm glad to say they found a great home at the end of the silent auction to benefit the humane society's animal shelter here in Santa Fe.

The Mouse Project cover and page layouts are coming along nicely, I'm using Lulu.com, so I'll have to post a few pics of them next time around. I haven't done the wordy bits yet. But soon I will have done, then as soon as the last pics come in I should be just about able to drop 'em in and be all done!


Click these links to visit my website... SteveWorthingtonArt.com - Sculpture that loves you back
or my Etsy store, CritterVille

2 comments:

Deborah Paris said...

Love the resin "water"! Look forward to seeing what else you come up with!

Steve sculpts critters said...

Thanks Deborah.
I was a little concerned the whole effect might look cheesy, but as it turned out I really like it!